Div 2 Nema 4

Div 2 Nema 4

These custom packages have the Z purge installed on them to be rated for Division 2 or Zone 2 area, Due to large heat dissipation for bigger drives systems or other equipment an air-conditioners or heat exchanger is required for cooling. Any of the cooling method used also must be rated for division 1 or 2 area. The beauty of this type of build is that we can use any of the general-purpose arcing type components or devices like relays, switches, thermostats, contactors, breakers, disconnects within this enclosure without any hazardous area approvals on them. We can offer you a drive of your choice with harmonic mitigation equipment like reactors, dvdt or matrix filters. In case we are unable to install the drive keypad on the outside door we offer a division 2 rated HMI which should be able to display most of the functionality of the drive. And if you only need certain function controllability and display, we offer operators button and pilot lights for that purpose, typically these buttons can take care of off/on, forward/reverse, speed up/down, fault and reset functions, and the pilot lights display power on, drive ready, fault, running functions. These panel must require the instrument air on site for the purge system to operate. To make these panel remote accessible for monitoring or operational purposes optional communication interface can be installed i.e. ethernet, modbus, backnet, lonworks, etc. All hazardous location panels and systems manufactured at Solution Control Systems facility are certified under special inspection so no need for field certification but local authority having jurisdiction must have final say on installation and wiring methods. Any other type of certifications or approvals for global locations can be availed as per requirement.

    Name (required)

    Email (required)

    Comment