Tips On Purging Your Panels

Cleaning industrial purged panels is an important part of making sure that industrial equipment is kept in working condition. Dirt and dust can get inside of the control panels of industrial equipment and cause it to malfunction. This does not only cost money by wasting energy but also can endanger the lives of others by making industrial equipment less safe.

Here are a few tips for purging your panels and maintaining:

Switch Off the Power Supply

When cleaning a control panel, it’s important to check if the power supply is on. Sometimes, the power will leak and the machine might turn on unexpectedly. To make sure this doesn’t happen, turn off the power supply before beginning to clean. In industrial settings, it’s important to make sure the power supply is turned off to prevent workers from getting injured. Take extra care when cleaning industrial machines to avoid any accidents.

Also Read: The Benefits and Features Of Purged Panels

Vacuum or Wipe the Dust

The first step is to use a damp paper towel to wipe the panel. You need to make sure you get in between the different buttons by pressing them to get the maximum dirt off the control panel. Finally, make sure you let the panel dry before putting it back in service. If it is very greasy, you may need to use a solvent to remove the grease. At the same time, you can add a little water to the grease to add some moisture. Finally, you just need to dry the panel and it’s as good as new.

Use Compressed Air

The use of an industrial control panel ensures the smooth running of the process in any factory or industrial facility. The control panel must be well-maintained to ensure that all the factory equipment is in working order. Purging the panels regularly is important to keep away corrosion and other unwanted deposits. You can spray compressed air onto the panel to remove all the dirt, grime, and other unwanted dust.

It can be an incredibly daunting task to purge an industrial control panel. The myriad of buttons, lights, ID’s and sensors can look like you’re attempting to launch a rocket. But it is not difficult if you know what you’re doing. The above tips will guide you through purging your industrial control panels.

Also Read: What Is A Post-Fire Smoke Purge System And Why You Should Install It In The Premises?