NEMA or National Electrical Manufacturers Association was founded in the year 1926. The organization has given the standards and guidelines which govern the design and specifications of the electrical enclosures that have industrial uses and applications. The different types of electrical enclosures are rated on the basis of access to the hazardous parts, environmental conditions, and other aspects. For instance, an electrical enclosure and its rating may provide to you a clue about the protection it may offer against oil, water, coolant, corrosive materials (including gasoline) and other hazards.

[ Read More ]

When an induction motor is connected to a power supply, it draws a high speed magnetizing current irrespective of the load level.  The induction motor has less power factor compared to its rated power factor. This is because, as the load declines, the torque producing current decreases. As the changes take place, the magnetizing current remains the same. The power factor is lower in cases where the load is lighter. Most motors control panels have a higher load demand which goes beyond the maximum load demand. Unfortunately, the motors do not reach their rated power factor even when they have maximum load demand.

[ Read More ]

Hazardous location panels and power distribution panels are installed at various locations and for the safety of various applications. Power distribution panels are rated for 2000 A current and 45 KA short circuit current rating that have 1600 A non focused disconnect for incoming power and 3 compartments of 600A fused disconnects for supplying the variable frequency drives. These panels play a pivotal role in power distribution at constant voltage level and to keep better control over it. These panels mostly distribute and switch power and counted as very crucial part of a power network for any equipment, building or facility.
[ Read More ]

Instrumentation control panels are installed for housing controllers, instruments, displays chart recorders, gauges, control operators and enclosure heaters. They are interconnected via electrical or process tubing as per the type of instrument or the type of the measurement – done by these instruments. These instrument panels are the combination of pneumatic and electric controls that houses pneumatic gauges, shut off valves, emergency stop operators and annunciation lights. These control panels are the basic requirement of different industries where safety of important devices and machineries is main concern. Depending on your requirement, you can get them with installation facilities directly from manufacturers.

Like instrumentation control panels, hazardous location panels are designed and built to function in environments where focus of flammable gases, liquids, vapors and combustible particles cause risks of explosion and flare-up. They work effectively to those areas where hazardous conditions exist. They withstand a number of different environmental variables and at the same time as remaining effective in terms of performance, reliability and durability.

Also Read: Instrumentation And Control Engineering Need Time 

[ Read More ]

People often found searching for the updated version of motor starters and soft starter panels from major brands to ensure better performance of motors installed in different machineries. People search for such devices that should be easy to maintain and use; while they can ensure long life of any machinery without compromising with performance.

[ Read More ]

Are you looking for a new range of premium quality hazardous location panels and electrical control panels in Canada?

You will get a new range of different models according to your requirement. Each and every control panel, instrument and device has its importance. Hazardous location panels and electrical control panels are the essential requirements for any oil and gas facility for better controlling and protecting power supply along with safety of all the connected devices.

[ Read More ]

There are different types of control panels and instruments required for the safety of  equipment and machines which are connected to power. They are required largely in all industries. Whether you are looking for updated and technically advanced soft starter panels, motor control panels or any kind of other panels and devices in Canada or anywhere else, you will have some better options of choosing the right instruments and panels in your budget and according to your requirement.

You have to find the right manufacturer or supplier of motor control panels and a variety of other panels in your budget and according to your requirement. There are many reputed companies offering you a variety of panels and starters for the safety of electrical and electronic devices. They are largely used in different work units and industries. In order to reach the right company for such control panels, online search is the most convenient ways. [ Read More ]

Soft starter panels and motor control panels are the essential requirement for a variety of machines for better monitoring and controlling. In new machineries they are in-built; while installed or replaced in machines too. Soft starter panels with internal bypass and Modbus are wonderful and adjustable soft start and stop feature that come with control power transformer with fused Primary and secondary start and stop button, run and fault lamps along with remote start via digital input or Modbus. There are numerous added features associated with the amazing motor control panels that will surely help you in the right ways to fulfill your requirement.

[ Read More ]

Hazardous location panels are designed specifically to activate in environments where concentrations of flammable gases, liquids, vapors and a variety of other explosive particles create jeopardy of explosion and flare-up. This is the highly regulated area of manufacturing demands in a manufacturer partner experienced in the significant standards and capable of time and again hitting all the marks in meeting your project’s documentation requirements.

[ Read More ]

Electrical control panels and electrical enclosures have their importance in ensuring to operate electrical machines and equipments smoothly with safety and physically protect devices in the panel. This provides human safety as well as ensures the long life and maintenance of all important electrical devices. These systems are installed at the front line of any controlled machine or equipment. There are numerous added benefits associated with the electrical control panels. You have to choose the right manufacturers or suppliers according to your choice.

Solution Control Systems is a trusted and fast-growing company bringing you a comprehensive range of control panels and enclosures for various purposes. You have to choose the right one as per the requirement. New range of available wiring for electrical buildings and skids, electrical control panels and electrical enclosures is made by following all the quality and safety standards and using premium quality material and workmanship. Main motive of the leading company is to bring you the best quality electrical control panels that can keep the entire supply system well maintained.

  [ Read More ]

Are you looking for highly advanced and innovative custom control panels and hazardous location panels to ensure proper operation and monitoring of your electrical equipment and instruments ? Do you want to replace old control panels with custom control panels or want to get hazardous location panels installed?

Such questions are very common among people who need sufficient and better power supply along with safety of the devices and machines installed. They often search for a variety of control panels from big brand names and at the same time want to get them installed.

If you are also one of them looking for such panels, you will have some better options of choosing the best online and from the comfort of home. There are numerous big brands offering you custom control panels and hazardous location panels along with electrical buildings and skids. Reaching the right one is an important decision to make.

Also Read: Benefits of Buying Hazardous Location Panels and Power Distribution Panels

[ Read More ]

Are you looking for soft starter panels or electrical control panels with installation services in Canada?

There are different types of control panels required for better control over electricity supply. Selection of the right one depends on various points. If you are looking for such panels, you will find various options to choose the right one.

Choosing the right company or a manufacturing unit that is making such electric control panels and soft starter panels is an important decision to make. If you are looking for one such company in Canada, you will have some better options of choosing the best one according to your requirement. [ Read More ]